Even with a heated garage it’s too cold to comfortably work on the airplane. I did receive my headliner from Aircraft Spruce yesterday, but it sat on the porch all day and was too cold to unwrap to inspect. I will do that today and post a photo or two.

The garage warmed up to 60 so I sprayed the second coat of poly brush on.

Well, it started out going on too thick and I got some runs, but I can smooth them out with MEK when it drys. I lightened up the application right away so just a small portion on the left side ran. I will try to apply the second spray coat on Wednesday.

Brought the wing Struts home.

First photo shows the two left side Struts and how they connect together at the fuselage.

Second Photo shows the two front Struts.

Third photo shows them stored under the fuselage for now.

Masking off areas so I can apply the first spray coat of Poly Brush.

It should cycle through just once, maybe twice, then stop on the last photo.

Still working on finishing tapes around the doors and windows.

From no covering to full covering.

Finish tapes are about ‘finished.’