Brought the wing Struts home.

First photo shows the two left side Struts and how they connect together at the fuselage.

Second Photo shows the two front Struts.

Third photo shows them stored under the fuselage for now.

Masking off areas so I can apply the first spray coat of Poly Brush.

It should cycle through just once, maybe twice, then stop on the last photo.

Still working on finishing tapes around the doors and windows.

From no covering to full covering.

Finish tapes are about ‘finished.’

Laying out the top finish tapes. Second Photo shows the fabric attachment over the cabin area prior to covering with finish tape.

Looking aft into the fuselage from the rear of the baggage compartment.

I’ve highlighted the cables in the following photo.  Red lines near the top are elevator trim cables,  blue lines are rudder cables, purple are rudder trim cables, and green are elevator cables.