Beginning work on the bottom shroud.  Removed the venturi tube and the doubler.

Underneath the shroud:

Temporarily reinstalled on the shroud.  The doubler wasn’t correct  so I’ll have to make a new one.  

After power washing.  Found one bent pushrod tub.

Before power washing:

Several layers of paint.  The top coat was red and cream while underneath that was brown and cream.  Then under the brown and cream was another red and cream.  The finally the blue and cream with the green primer under that coat.  It took a lot of stripper and sanding to get it off.  Still not completely finished but I’m done for the night.